The Larson Electronics HALP-48-2L-LED-SIBAB-SS stainless steel I-beam mount hazardous area LED light fixture is designed to handle the rigors of wet and corrosive marine environments. This 4-foot long, two-lamp fixture is ideal for operators seeking a top quality hazardous location light that will improve light quality and reduce operating costs. The fixture is constructed of non-corrosive materials including a polyester housing reinforced with glass fiber, a poured in gasket for reliable sealing and an impact resistant acrylic diffuser. Eight corrosion resistant stainless steel latches secure the lamp cover to the housing and provide a firm lock against the poured in seal to prevent drips and water intrusion.
The 28 watt LED lamps included with this fixture produce 30 percent more illumination than standard T8 bulbs while offering lower amp draw and increased reliability. Each lamp produces 3,360 lumens at 120 lumens per watt, for a combined total of 6,720 lumens. The solid state design of light emitting diodes provides a more reliable, stable and energy efficient light source over traditional fluorescent lighting. This I-beam mount fixture is equipped with two stainless steel I-beam clamps and two stainless steel adjustable flange brackets. This custom combination allows operators to secure the light fixture to existing I-beams without penetrating them. Once installed the center of the light fixture housing will sit 1 foot to 1 1/2 foot below the I-beam and operators can adjust the fixture 45 degrees each direction, for a total of 90 degrees of adjustability. The I-beam mount is designed for upward lighting for pits in work stations, as well as downward lighting for pipe racks and under shelving. This fixture is universal voltage, not multi-tap, and operates on any voltage from 120V to 277V without any modifications.
This light fixture is U.S./Canada approved Class 1 Division 2 Groups A, B, C, and D, UL 1598A listed.