The BinMaster CVR-625 mini vibrating rod is a compact point level control designed for use in small bins and hoppers where other level sensors will not fit. It features an updated design that allows for the detection of very light materials with a bulk density as low as two. The rod can be used for measuring plastics, food, seed, chemicals, and other pellets or dry granular solid materials.A signal from the electronic circuit of the CVR-624 causes the single rod of the instrument to vibrate on its resonance frequency of approximately 460 Hz. When material covers the rod of the probe, the vibration stops. When the blade becomes uncovered, the vibration will restart and the relay will switch back. The rod features three sensitivity adjustments and is high and low level fail-safe. It is able to be mounted both on the top or side of a bin, with 1-1/4 inch NPT, and has a maximum pressure of 145 psi. It features a relay of SPDT 5A 250 VAC and an input voltage range of 20 to 250V AC/DC. Remote electronics are also available to make monitoring easier. The rod also has an overall installation length of 6 feet and is able to work in temperatures of up to 300F.

Fill out the form below to request more information about BinMaster CVR-625 mini vibrating rod